F-220 MULTIPURPOSE CAFS UNIT

MULIPURPOSE STAND ALONE CAF UNIT

DESCRIPTION

It is a powerful independent caf unit. It use the F-220 CAF as core and it is joined with a stainless steel water tank and frame. 

It is possible to load the unit with 4 different water levels, allowing the unit to weigh 500, 600, 800 or 1230 kg

It is designed to be installed in: 

+ vehicles which do not have a PTO (pick-ups, vans, trailers) 

+ to fly with helicopters, 

+ to use as stand alone unit in industries 

Equipped with engine, centrifugal pump, proportioner, compressor, foam generator, water tank and foam tank.

TECHNICAL INFO

WATER TANK: 760 LITERS 
FOAM TANK: 25 LITERS 
FUEL TANK: 9 + 22 LITERS
WEIGHT WITHOUT WATER: 470 KG 
DIMENSIONS: length 1300 x width 1000 x height 1500 mm

CAFS INFO

COMPLIES WITH EUROPEAN STANDARDS EN 16327:2014: CAFS 200 and EN 16327:2014: PPPS200
CAF DISCHARGE FLOW: 220 l/min @ 8 bar (shutdown effectiveness such as 1540 l/min of water alone)
HOSE CONNECTION FOR CAFS OUTPUT: 1,5”
SUCTION INLET FOR WATER SUPPLY: 1,5”
TANK FILLING: 2”
EXPANSION RATIO: Approx. 6 (wet foam), Approx. 20 (extra dry foam)
WORKING PRESSURE: Max. 10 bar
TYPE OF FOAM: Extra Dry, Dry, Wet, Only water + foam, Only water

FOAM PROPORTIONAL SYSTEM INFO

FOAM PROPORTIONAL MIXER: Water-hydraulically driven, From 0,5% to 5% steplessly adjustable @ 8 bar
PUMP: Proportional dosing pump

WATER PUMP INFO

TYPE: Centrifugal Pump
STAGE: 2
BODY: Aluminium
IMPELLERS: Bronze
NOMINAL FLOW: > 240 l/min PRESSURE: > 10 BAR
PRIMING: Diaphragm Hand Pump

firecafs portable cafs unit

ACCESSORIES

NOZZLE AND TIPS

The shut-off device has many differents and inter-changeble tips ideally suited for the use of compressed air foam as an extinguishing agent. From 1/2” to 1 1/4”

RAPID INTERVENTION HOSE REEL

It is possible to add the rapid intervention electric and manual rewind hose reel on skid-unit or vehicles.
Main features:
• Extractable roller guide tube: The hose guard folds out over the vehicle‘s outline and ensures that the hose does not touch the vehicle and prevents damages.
• Brake
• Clutch
• Internal electric drive
• Easy rewind

HOSES

High quality and high visibility hoses 25, 45 and 70 mm
Main features:
• High visibility
• Light-weight
• Flexible
• High abrasion resistance
• Small friction loss

LED WORK LIGHT

It is possible to add a single led light at the Firecafs unit with harness and toggle switch can be set in control panel

LED TOWER LIGHT

Dual led light head telescopic tower with harness and toggle switch can be set in control panel

MOBILE CONTAINER

The mobile container is built with aluminium profiles. It make easyer to move the unit

ELECTRIC FOAM PUMP

Electiric foam pump to refill the foam tank on the truck or skid-unit. Available 12, 24 V DC or 110, 220 AC or US version

FOAM

The exceptional high quality foam in association with Firecafs foaming system guarantee an
optimal extinguishing and cooling effect of the Firecafs foam

FC-220 compact cafs unit

FIRECAFS FOAM AND CONCENTRATION

Firecafs foaming agents have been especially developed for the production of compressed air foam. Threefold firefighting due to cooling, isolation and seperation effect. Unmatched penetration for extinguishing depth and low foaming agent consumption.

  • WHERE: Firecafs foams can be used everywhere: in structural fire extinguishing, road accidents, oil and gas, industry, aviation, recycling, warehouse, boats, exposure protection and wildland fires.
  • CONCENTRATION: Firecafs foams are good at wetting and cooling fuels, suppressing flammable vapors and reducing smoke.
    Firecafs foams also has an opaque surface to reflect heat, creates insulating bubbles, holds water on any surface, is biodegradable and has low mix ratios from 0.1 percent to 1 percent.
  • SPECIAL FEATURES: Firecafs foams increases the ability of water to penetrate fuel sources as much as 1,000 times better by reducing surface tension.
    Firecafs foams enhances water’s ability to cool by as much as 300 percent
  • OTHER FEATURES: Low proportioning rates for long operation times and cost-saving consumption, mixable with fresh water, brackish water and sea water, very good biodegradability of the fluorine-free extinguishing foams

FOAMS

A PLUS – 0,3%

Firecafs A PLUS foam can be used
in a concentration range of:
0,1-0,3% as wetting agent
0,3-2% as foaming, with potable, sea or brackish water for Class A (solid) fires and Class B (hydrocarbon fuels)

A – 0,1-1%

Firecafs A foam can be used at 0,1-3% for Class A fires.
When adding the foam in concentrations as low as 0,1%, the aqueous solution receives excellent wetting characteristics

A-B – 1%

Firecafs Foam A-B  class is fluorine free, low viscosity, newtonian foam concentrate to extinguish hydrocarbon fuels fires and solids.
Concentration class A and B: 1%